Barbed Hose Adapter for Air and Water Stainless Steel 3/8-18 * 3/8" [Male NPT] length_3-3-4

Barbed Hose Adapter for Air and Water Stainless Steel 3/8-18 * 3/8" [Male NPT] length_3-3-4Slide the barbed end into rubber hose and secure with a clamp or a crimp on hose ferrule. 304 stainless steel fittings have very good corrosion resistance, so theyre the best choice for high humidity environments. Fittings with a threaded end are also known as hose nipples. The fittings have a length of 3 8'' and a thread of 3 8 18.

The screw has a length of 2-3/4 and a thread of 1-1/4-12

The screw has a length of 8-1/2 and a thread of 1-1/2-12

Zinc-plated and zinc yellow-chromate plated steel anchors are corrosion resistant in wet environments

The shackles have a diameter of 1-1/8

Note: Working Load Limit applies to the eye nut only

The elbows have a 4-8 thread and they are 45 degrees

The screw has a length of 4-1/4" and a thread of 1/2-13

This hexagonal bolt has a length of 5-1/2" with a threading of 7/8-14 [Partially Threaded]

The screw has a length of 9 and a diameter of 5/8

The elbows have a 1-1/4 thread and they are 45 degrees

A narrow inner opening restricts the movement of wire rope and chain

The screws have a thread of 1-8 and a length of 14