Bando 460-5M-9 5M HT Timing Belt Tapered & QD BushingBando 460 5M 9 Synchro Link HT (High Torque Synchronous) belts' curvilinear tooth design improves stress distribution to provide high horsepower ratings over a wide speed range and high torque transmission at low speeds. The rounded tooth profile meshes precisely with matching pulley grooves so there is no belt creep or slip to cause speed variation. HT belt drives are 99% efficient, leading to significant energy savings on high horsepower
lb Locked rotor torque 210 % Breakdown torque 240 % Locked rotor time 39s (cold) 22s (hot) Moment of inertia (J) 166 sq
875 IN Shaft Ground Indicator Shaft Grounding Shaft Rotation Reversible Speed 1180 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
0 % Enclosure Modification Severe Duty Features Feedback Device NO FEEDBACK High Voltage Full Load Amps 110
23 IN Power Factor 79 Product Family General Purpose Pulley Face Code Standard Rodent Screen None Service Factor 1
Bando - 5-8VK1060 Power Ace® Aramid Combo
Bando - 20T5-300UG Synchro-Link® Trapezoidal Timing Belts - Polyurethane (Metric)
25 HP Mounting F-1 Flange Without Terminal box¹ Left position Enclosure IC411 - TEFC
Frame 364/5T Output 50 HP (37 kW) Number of Poles 6 Frequency 60 Hz Rated speed 1182 rpm Slip 1
Load 78° C Start Configuration DOL Break-Down Torque 336 LB-FT Pull-Up Torque 149 LB-FT Locked-Rotor Torque 211 LB-FT Starting Current 232 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S
Bando - P72H150 SF The type of pulley used on a Synchro-Link® drive depends on a number of factors
Kysor Warren9A10-061
Power supply 200-240 V Input phases Single-phase Rated current (ND) 2
