3.5 lbs cross peen hammer #2 Blacksmith made

3.5 lbs cross peen hammer #2 Blacksmith madeThis Cross peen hammer is made from an old forklift tine and a rough cut piece of ash, which is harvested 15 minutes from my shop. Total weight with handle is 1. 75kgs 3. 88lbs. handle length is 15". Head from peen to face is about 5 3 4". Both handle and head has been treated with linseed oil. The hammer in the picture is the one you will receive.

and should be hand washed

Head from peen to face is about 6 3/8"

Feature a hole in the middle to help with control when you hands are slippery with wet clay

They have been treated with linseed oil to help prevent rusting

Length :  6 inches

Craft flawless ceramic forms with ease

Introducing our versatile and stylish leather scribe

The blade has been honed to a fine edge to ensure accuracy and control with every use

This rib is made by me

If you are interested in having your logo laser engrave on the trimmer please message me to see if my laser can engrave it

This can have a sharp point to use as a candle scribe or a dull point for a hair pin

Please leave a message during checkout of the name you would like engraved on it