3360-1L PYREX 1L General Purpose Distilling Apparatus with open top PBT caps

3360-1L PYREX 1L General Purpose Distilling Apparatus with open top PBT capsCorning This PYREX 500mL general purpose batch distillation apparatus allows the addition of reagents via the No. 27 Standard Taper PYREX stoppered neck. It is ideally suited for the batch production of high purity distilled water. The flask has a flat bottom with a side delivery tube, terminating in a 19 38 Standard Taper joint. Graham condenser tubulations are 10mm O. D. For replacement stoppers, see No. 7650. For replacement condensers, see No.

Corning The E-Cube™ System is a simple bioreactor with 8

single-use device that is 100% pressure-hold tested before shipment

special measuring sensor integrated into the balance

SW-846 methods 9010 and 9012

TC-Treated

Its design opens new possibility within the scope of  balance

It is possible to control ionizer operation using a weighing instrument panel

2-layer Polystyrene vessel with Vent Caps

the influence of electrostatics onto the weighing result is limited

Corning This 1L PYREX® replacement Kuderna-Danish flask has a 24/40 outer Standard Taper upper joint and 19/22 inner Standard Taper lower joint and includes a pair of 1 1/2 inch stainless steel springs

The 10mL size is not graduated

Corning These 22x300mm PYREX® chromatography columns have a 250mL reservoir at top and a Product Standard 2mm bore PTFE (Polytetrafluorethylene) plug stopcock at the bottom