Pressure Relief Valve Backfill Adapter

Pressure Relief Valve Backfill AdapterThis Backfill Adapter is for use with the Pressure Relief Valve and the Vacuum Plug to fill an enclosure with an inert gas or to pull an enclosure to vacuum while maintaining a seal! When screwed onto the PRV, the Backfill Adapter seals to the PRV and pulls opens the valve, creating a sealed path into the enclosure that can be removed without breaking the seal. This allows you to fill the enclosure with an inert gas or to seal an enclosure while

current configuration

The Battery Cell Checker is a convenient way to monitor the charge status and health of any 2-6 cell (2-6s) lithium ion battery

2 x M10 holes

and the bottom of the hull have mounting points so that you can mount anything

unmanned underwater vehicles (UUVs)

1 x Aluminum End Cap with 7 x 10mm holes

These extra probe tips for your SOS Leak Sensor probes let you replace old and worn probes tips that have been exposed to water multiple times

10 x Acetone Wipes

Designed in collaboration with Botblox of the UK

you’ll need a few things to get started:

-10g (Transducer only)

1 x 8 GB SD Card Preloaded with Raspbian for ArduSub