Bar Tap | Standard Stainless Brumby Tap | Keg Tap a12

Bar Tap | Standard Stainless Brumby Tap | Keg Tap a12Limited Time In stainless! Keg Tap Chrome Plated Brass "Brumby Tap" Includes Handle. Fits on pretty much any tap tower or shank (non Euro shanks) East to dissemble & clean Wall Shanks available here Or MFL Shank (to make a clip on tap) here > Or purchase a full Clip on Tap bundle here > This is the standard keg tap that comes with our mini keg packages. It is a "brumby" style keg tap (the most common style of metal tap around the world) and is made of

The cornelius keg connections are the same as our iKegger mini kegs when used with the double ball lock spear

Should the pressure get too high in the keg (about 35 psi) the valve will release some to prevent any explosions or over carbonated beer (the kegs are rated to 100psi so it  would take a LOT of over priming to make one blow up)

finishing with a dry

This spout replaces the standard spout on the SS Intertap / Nukatap Premium Bar Tap

pressurise with the mini reg (gas canisters sold separately) then clip on the tap and pour

Standard growler size (marked with a 1

If you have any specific requirements or would like to discuss this with us then give us a call or email anytime

This option is in-case you already have a MFL threaded disconnect

Fill with your whipper with beverage of choice - screw on the top - charge with a pure Nitrogen Bulb or Cream bulb and pour

You can brew/ferment in your own fermenter and keg straight into this setup

CO2: If you would like CO2 cylinders to fit these as well let us know and we will sort some out for you

Adjust Pressure with the regulator and Pressure release valve (max 75psi)