WS25 Seal

WS25 SealThis is a weld on, trim to fit, lip shroud that is about 2. 5" wide. This item protects your excavator buckets base edge or leading edge from wear in between the bucket teeth. Without this protection your base edge will scallop out over time, get thin, and crack.

It is 3 mm thick with an OD of 100 mm

This is a p335 slotted pin for use with 335 series teeth

It is 5 mm thick with an OD of 170 mm

This is a 5 ton weld on bucket hook with the spring loaded safety latch

Please refer to the drawing for specific dimensions

This is a p400 flex pin for use with x400 series teeth

H & L style

You will also need a 45pn pin

This is a genuine ESCO Ultralok replacement lock for all u55 series teeth

This Reducer is used to shrink the size of the round hole in your bucket lip (base edge) from a 3/4" bolt to a 5/8" bolt

This steel bucket pin shim is for a pin with an outer diameter of 50 mm

This is a genuine ESCO Ultralok u20s general purpose bucket tooth