Dortronics 118x-50 Filler Plate (1150 Lock) Printer ribbon

Dortronics 118x-50 Filler Plate (1150 Lock) Printer ribbonFiller plate for Dortronics 1150 series electromagnetic lock. Includes screw kit. Picture shows bronze unit. Pick correct size and finish.

See their full line card here: Ruckus Line Card

Dimensions: 1-5/8" W x 1-7/8" H x 13/16" D (42mm x 48mm x 20mm)

For printing the front of the card:Y - yellow panelM - magenta panelC - cyan panelK - black resin panelO - overlay panel   For printing the rear of the card:K - black resin panelThe IDP 659376 ribbon kit includes a cleaning roller to ensure optimal daily printing and is compatible for use with IDP Smart-51 and Smart-31 printer models

The DE8310 Delayed Egress all-in-one lock can detect when pressure is applied to a door and can be field selected with a release delay of 15 or 30 seconds

ANSI/BHMA A156

Specify the card format

UL294 & UL1034 listed

motion sensor and mechanical timer push plate labelled PUSH TO EXIT

The device can be set up as a momentary relay output from a half a second to 30 seconds

Use it in conjunction with a plug-in-transformer and an affordable electronic keypad

520mA@12VDC but selectable to also operate also on 24VDC

No frame cutting required for this application