PolyMide™ CoPA EOL SALEPolyMide CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180C. Does PolyMide CoPA requires an enclosed printer? No, all our Nylon features our Warp Free Technology which means it does not require a heated bed or heated chamber of more than 50C. PolyMide CoPA can be printed on a 30 40C bed without enclosure. Printing, Drying and Annealing Settings? Printing
PolyLite™ PLA Pro is the best of both worlds combining excellent rigidity and high impact strength
Panchroma™ Translucent colors provide a very unique effect with single wall prints
*BY MICOM LABORATORIES:
HT-PLA-GF is glass fiber-reinforced
If we had a simple axis going from "low durability but easy to print" on the left to "high durability but challenging to print" on the right
Superior sealing You'll never have to break the seal again Don’t worry about moisture ruining your prints
Usually the polymer is called PETg when the major diol is ethylene glycol (>50%) and PCTg when the major diol is CHDM (>50%)
making it perfect for enclosures
Version B displays an even higher durability
This toughened PLA formulation delivers improved impact resistance
and consistent dimensional accuracy
4mm nozzle: 29mm3/s -> 725mm/s
