Siser Easyweed Red Heat Transfer Vinyl mixing and pantone inks

Siser Easyweed Red Heat Transfer Vinyl mixing and pantone inksHeat transfer vinyl and cad cut transfers are a great way to customize shirts, jerseys, sweats and much more. Vinyl film for cad cut transfers are great for small run customization for names, numbers, simple text and logos, and on the spot decorating! All you need is a plotter to cut out the transfer and a heat press to apply. INSTRUCTIONS All films must be cut in mirror image. It's recommended that the fabric or garment is pre pressed before the film

Belt height: 33"

Green Galaxy™ Fusion Pigment load should not surpass 25% of total ink mixing ratio

Pitch Black (for metal look) and any color

Skin: Wash with soap and water

Easy assembly

Reverse screen and rinse with high pressure

the ink layer needs to hold there for at least 20 seconds

The Albatross Expert 3000 Spot Remover Gun is perfect for T-shirt shops

Discharge Base

this system must be used with AlbaChem S

and ultimately saves you money

Let the ink sit for 5-10 minutes before testing or going into production to ensure full dispersion of the crystals into your ink