Filaments Depot Gradient PLA - Emerald Shore (Blue-Green) non brittle pla

Filaments Depot Gradient PLA - Emerald Shore (Blue-Green) non brittle plaFilaments Depot Gradient PLA is made from quality virgin PLA. Both PLA resin and colorant are food grade material. Made in Ontario, Canada using sophisticated extrusion equipment and high tech drying technology, the filaments are monitored with live multi axis micrometer, and computerized diameter monitoring technology, producing clean, repeatable and reproducible results. There is an approximate 10cm transition from one color to the next. PLA can be

Elongation at break ISO 527-1 ≤ 5%

Retraction Distance: 1mm

top-notch print quality

allow the part to soak at that temperature for a sufficient amount of time

You can turn off the oven and let it cool naturally inside or open the oven door slightly to facilitate cooling while ensuring a gradual temperature decrease

Annealing can help relieve internal stresses and improve the part's mechanical properties

matting additive

Engineered from bio-based materials

which means that it remains stiff and rigid at relatively high temperatures

and samples placed as shown the deflection of non-heat treated part start in 5 min while the heat treated part maintain its shape even after 30 min under 120c

Net Weight: 1KG

The following test conducted on 3d printed samples  The one on the right was heat treated following the above steps and the sample on the left was not heat treated