3" Diameter Estes Bandit Upscale Parts Kit

3" Diameter Estes Bandit Upscale Parts KitThe Estes Bandit is a classic sport model that is extremely popular. Why not upsize it from a BT 60 to a 3" body tube with a 29mm motor mount? The parts in this upgrade kit added to an Estes Der Big Red Max kit (not included) will allow you to do this! Parts Included: 17" long 3"diameter body tube (one) 12. 3" long 3" diameter body tube (one) 6" long 3" diameter body tube coupler (two) 1 8" laser cut plywood bulkheads (one) 1 8" laser cut plywood

The final finishing is straightforward

Recommended adhesives are standard epoxies or cyanoacrylate

FAI rules for duration events such as parachute

Use of our FAI Fin Jig to do this is highly recommended

Compatible with the balsa fins and paper centering rings in the kit or our upgraded laser cut fins and centering rings

To install this part use a 1/16" drill bit to make holes in the red plastic part from the Estes kit as shown in the picture

There is a price difference between the two versions due to the cost of the carbon fiber rods

Click here for instructions on SK6 construction

which featured the SP-25 pattern sheet

The Estes Bandit is a classic sport model that is extremely popular

This is a one piece 3D printed Apollo LES Tower Lattice

Compatible with the balsa fins and cardboard centering rings featured in the kit or our upgraded laser cut plywood fins and centering rings