AIM Technologies PDM08/PDM32 10"Dash Mount - Modular Steering Assembly Chassis Tab:With 90degree Bolt on Mount

AIM Technologies PDM08/PDM32 10"Dash Mount - Modular Steering Assembly Chassis Tab:With 90degree Bolt on MountAIM Technologies PDM08 PDM32 10"Dash Mount Due to the size of the Dash, this will probably more likely be used with our single mount centre hub on the steering column or our chassis weld on and bolt on tabs. Though this will work with out steering wheel mounts if you prefer. Optional Weld on tab for your chassis or steering column. 2mm thick in Raw Stainless Steel Our Modular Steering Wheel Components are Stainless Steel (raw finish) interchangeable

Transform your phone or iPod into a steering wheel mounted data logger/laptimer using one of the many apps available in the App Store and Google Play

2mm Thick in raw Stainless Steel

60mm high for use without levelling pads at the track or on a flat patch

No Dash/Display mount included in this listing

Re-install trailing arm

All hardware and fasteners

this will probably more likely be used with our single mount centre hub on the steering column or our chassis weld on and bolt on tabs

powder coat or plate the arm (MAKE SURE THERE IS NO PAINT OR POWDER COAT ADDED TO THE SURFACE THE BEARING SITS)

The Modular Quadlock Adapter (this item)

Not suitable for fully flat steering wheels (must be slightly dished)

3mm Hub Spacer (Needed if you have a flat steering wheel or the 'dish' is less than 50mm)

400mm ramp length