Midwest Optical Systems Ni200-40.5 1/2" Lens

Midwest Optical Systems Ni200-40.5 1/2" LensMidwest Optical Systems Ni200 40. 5 Reflective 1% Transmission M40. 5 Neutral Density Filters MidOpt Neutral Density Filters serves as sunglasses for your system and can be used with monochrome or color cameras. Designed to reduce light intensity neutrally over a specific wavelength range without affecting image color or contrast. Available in a variety of optical densities Reduce light intensity while maintaining a wide aperture and shallow depth of

Midwest Optical Systems Ni120-77 Low Reflectivity 6

14-bit Dimensions [W x H x L] 29 mm × 29 mm × 30 mm Mass 36 g Non-Isolated I/O Ports 1 bi-directional

DMM 36MX296-ML MIPI CSI-2 Board Cameras: Mono Camera Sony IMX296 1/2

1 output Power Consumption [Maximum] <3 W Power Requirements 8-24 V via GPIO or 5 V via USB3 Serial Port Supported Storage Humidity 30 to 95% (no condensation) Storage Temperature -30° to 60°C

27" FHD 1920x1080 LED Monitor

DMK 38UX255 USB 3

5 Red Edge Bandpass M22

99 (Mode 7) Gain Range 0 dB to 29

JAI SW-4000T-MCL-F 4K prism line scan camera Camera Link

0 interface does not provide sufficient power for this

A74-0065-1 (USB A 3

Midwest Optical Systems Bi632-58 Light Red Interference Bandpass M58 Bandpass Interference Filters