Baldor EM251302T-4 300HP, 3565RPM, 3PH, 60HZ, 447TS, A44084M, DP CONTROL STATIONS

Baldor EM251302T-4 300HP, 3565RPM, 3PH, 60HZ, 447TS, A44084M, DP CONTROL STATIONSSpecs Catalog Number EM251302T 4 Enclosure DP Frame 447TS Frame Material Iron Frequency 60. 00 Hz Motor Letter Type Three Phase Output @ Frequency 300. 000 HP @ 60 HZ Phase 3 Synchronous Speed @ Frequency 3600 RPM @ 60 HZ Voltage @ Frequency 460. 0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals CCSAUSEEV Ambient Temperature 40 C Auxillary Box No Auxillary Box Base Indicator Rigid Bearing Grease Type Polyrex EM ( 20F

83 % Rated voltage 230/460 V Rated current 326/163 A L

125 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1180 rpm 980 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding Normally Closed Thermostat Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None XP Temp Code T3C Drawings

5 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

230/460 V 60 Hz 2P 380 V 50 Hz 2P IE3 400 V 50 Hz 2P IE3 415 V 50 Hz 2P IE3 380 V 50 Hz 2P 400 V 50 Hz 2P IE1 415 V 50 Hz 2P IE1

83 % Rated voltage 190-220/380 V Rated current 3

5 POLES 10 NUMBER SPEEDS 1 RPM 1800 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 208-230 VOLTS 208 VOLTS 2 230 FRME 56 SHAFT CODE C STATOR DIAMETER 5

Reference JC Application Of the contactor CWM Current application 150 A Main contacts 3P Auxiliary contacts Not specified Rated insulation voltage Ui=690 Volts Attributes

Load 76° C Start Configuration DOL Break-Down Torque 185 LB-FT Pull-Up Torque 94

5 kW (25 HP) Number of Poles 4 Frequency 50 Hz Rated speed 1476 rpm Slip 1

lb Locked rotor torque 200 % Breakdown torque 210 % Locked rotor time 18s (cold) 10s (hot) Moment of inertia (J) 89

1 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready IP Rating NONE KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 12 AWG Motor Type 0944M Mounting Arrangement F1 Number of Poles 4 Overall Length 25

06 IN Service Factor 1