Lead II - Solid Shiny White .090" / 2.29mm thick, with bevelled edge Deluxe Jaguar Bass Made In Japan

Lead II - Solid Shiny White .090" / 2.29mm thick, with bevelled edge Deluxe Jaguar Bass Made In JapanThis Fender Lead II pickguard will only fit genuine USA made 1979 1982 Fender Lead series guitars. The description of this instrument is as follows: Two specially designed X 1 single coil pickups, one at the neck, and the other at the bridge. The X 1 pickup was also used in the bridge position on the Strat and the Dan Smith Stratocaster models. 3 position pickup selector switch (neck, neck and bridge, bridge), 2 position phase shift switch (in phase,

Threaded bushing length = 3/4 in

Strat Wiring Upgrade Kits

Showman‚®

Held on to the body with 5 holes

Mounting screws and push fit bushings are included

The red reflective layer is attached to the underside of the acrylic

Please note that there have been several variations of this colour over the years

21 Polymet 4049-2087 Wide/Medium Frets with a 12 inch maple fingerboard radius

the 1960 VOS model with 2 x P-90 pickups

Will accept a 10/32 threaded tremolo arm

5mm thick and comes with a straight edge (no bevel)

61mm for the bridge version