Hornady Match Grade Die Bushing .286 Neck Sizing brand_-Knivegg

Hornady Match Grade Die Bushing .286 Neck Sizing brand_-KniveggThe Hornady Match Grade Die Bushing . 286 is a precision ground interchangeable neck bushing for use with Hornady Match Grade Bushing Dies. With an inside diameter of . 286", it sits within a range of bushings offered in . 001" increments, allowing the precision handloader to select exactly the right diameter to match their brass neck thickness and achieve the desired neck tension. Neck tension is one of the most significant variables in load

The set comes in a stackable die storage box and threads onto any standard 7/8"-14 press

minimising the risk of ricochet and reducing pelt damage on foxes or coyotes where that matters

500 Nitro Express cases

Neck tension — the interference fit between the sized case neck and the seated bullet — has a direct bearing on consistency of bullet pull and

jackdaws and rooks

The 4–16x magnification range with a 44 mm objective lens gives versatility across stalking ground: at 4x you have a 9

Stretch panels in back of knees for added comfort and range of motion

The soft lead increases friction against the barrel

For ankle stability we've incorporated Crispi's proprietary Thermo Wire Technology (TWT) which is an innovative system to provide the upper with greater stability

so it works across the full range of centrefire rifle calibres used for stalking

shooting and general outdoor use in changeable British weather

glassing or handling kit