1989-1998 Cummins 5.9L Hamilton Cams Over Sized Valves (07-h-002) 2015

1989-1998 Cummins 5.9L Hamilton Cams Over Sized Valves (07-h-002) 20151989 1998 Cummins 5. 9L Hamilton Cams Over Sized Valves (07 h 002) 45 degree 1. 850 intake and 45 degree 1. 750 exhaust. When machining valve seat on OEM head to fit these larger valves, make sure you set valve face at . 055 from cylinder head surface.

sending units and oil pans that meet or exceed OEM standards

Driven BR is a Break-In oil and should only be used for engine Break-In

maintaining precise valvetrain motion and safeguarding against valve float

Our fully synthetic 5W-40 oil is suitable for use in emission compliant engines that utilize heavy exhaust gas recirculation (EGR) and exhaust after-treatment devices such as diesel particulate filters (DPFs) with or without diesel oxidation catalysts (DOCs) and selective catalytic reduction (SCR)

uneven engine wear

The MAHLE HS54580C Head Set for your 2011-2016 GM 6

Ram Cummins/Titan EZ LYNK® switch

Moly and higher performing base oils and viscosity index improvers than are used in typical formulations

lash is too much

it’s made from cast A356

any wear metals from other failures get into the non-filtered splash oil and can kill DLC coating in short order

055″ valve face depth with a standard head gasket and a 99 intake centerline